We were about to finish our basement and wanted it checked first given the age of the house. The inspection found a small moisture issue near the foundation we wouldn't have noticed, and we got it handled before it became a bigger problem.
Spokane, Washington
Mold Inspection in Spokane, WA
Our IICRC-certified crew handles mold inspection for Spokane homes and businesses. Same-day response, we bill your insurance, and free estimates.
IICRC certifiedSame-day responseWe bill insuranceFree estimates
Reviews
Rated 4.9 by Spokane-area neighbors
We had mold after a slow leak under the sink. They inspected it, explained the plan, and left the space dry and clean.
Very thorough mold inspection. They explained the lab results in plain words and gave us a fair quote.
Our process
Our mold inspection process in Spokane, WA
Inspect
We walk the property, checking visible mold-prone areas and using moisture meters throughout.
Contain
If active growth is found, we advise on containment steps before any remediation begins.
Remove
For visible growth found during inspection, we can scope removal as part of the same visit.
Dry
We identify moisture sources that need to be addressed alongside any remediation.
Verify
We document findings clearly so you know exactly what's next, whether that's remediation or monitoring.
Certified & trusted
Standards we work to, carriers we bill
Where we work in Spokane
Spokane neighborhoods we cover
We cover Spokane and the surrounding Spokane County streets, drying out water damage before mold has a chance to take hold.
Town and CountryCountry HomesMillwoodAirway HeightsMeadSpokane ValleyFour LakesFairchild Air Force Base
What it costs
Mold Inspection cost in Spokane, WA
Every job is different, so here are the typical Washington ranges we see. These are planning numbers, not a quote.
Small area
$500 to $1,500
A single moldy spot, a closet, or under a sink. We contain it, remove it, and treat the surface.
One room
$1,500 to $3,500
A bathroom, kitchen, or bedroom with mold on a wall or ceiling, plus the moisture source fixed.
Basement, attic, or crawl space
$2,000 to $6,000
Larger areas that need more containment and drying. Common here after spring rain or a slow leak.
Whole-house or severe
$10,000 and up
Mold across several rooms or after major water damage. We work in phases, room by room.
We give free estimates, so the surest way to know your number is to call. Want a ballpark first? Try our instant mold remediation cost calculator. Filing a claim? We bill your carrier directly, so see our mold insurance claims guide.
Local knowledge
Mold Inspection for Spokane, WA homes
Mold Inspection in Spokane tends to start the same way mold does across Spokane County: bathrooms, kitchens, and laundry rooms in Spokane where everyday humidity has nowhere to go. When that moisture sits for even a day or two, mold takes hold, and that is when homeowners from Town and Country, Country Homes, Millwood and the rest of Spokane call us.
We handle mold inspection for Spokane the right way. We find and fix the moisture source first, because mold always returns if the water problem is left behind, then we contain the area and remove the mold safely.
Our team is based in Nine Mile Falls, about 15 minutes from our Nine Mile Falls base, so we can usually reach a Spokane home the same day. Our methods follow public guidance from the EPA and the CDC on handling indoor mold safely.
Spokane specifics
Mold Inspection in Spokane: what actually causes it
By the time a family calls us for Mold Inspection, they have usually already seen a damp, earthy smell you cannot place. When people here search for Mold Inspection, the growth they can see is usually the last symptom, not the cause. Older and newer homes alike need Mold Inspection, from the newer builds near Airway Heights to the oldest ones in town. If you have noticed a damp, earthy smell you cannot place in your home, mold inspection is worth a call before the damp reaches the framing.
For a home in this area, mold inspection starts with finding the moisture, because the water is what feeds the mold. We handle Mold Inspection for homes from Airway Heights to Mead and the surrounding area the same careful way. Mold Inspection is one of the more common calls we get from homeowners around Spokane. Most Mold Inspection jobs in the area trace back to air conditioning condensation feeding mold on cool basement and closet walls, a pattern we see week after week.
A Mold Inspection visit tends to run like this:
- Walk the home and note every spot that shows or smells like mold
- Explain the likely cause in plain words, not jargon
- Recommend testing only where it actually adds value
- Check the usual sources: roof, plumbing, grading, and ventilation
- Photograph and map what we find, room by room
We are about 15 minutes from our Nine Mile Falls base, so mold inspection often happens the same day you call.
Good to know
Mold Inspection in Spokane, WA: common questions
Do I need visible mold to get an inspection?
No, many inspections happen because of a musty smell, past water damage, or just wanting a clear picture before a renovation or home purchase.
What's the difference between an inspection and testing?
An inspection is a visual and moisture-based assessment. Testing involves collecting samples for lab analysis, which we offer as a separate or add-on service.
What happens if the inspection finds mold?
We'll explain what we found and what remediation would involve, so you can decide how to move forward with clear information.
Is the mold inspection you do in Spokane to a real standard?
Yes. Our crew follows the IICRC S520 standard for mold remediation, the same framework insurers and inspectors recognize across Spokane County.
How long does a mold inspection take?
It depends on the size of the home, but most residential inspections take a couple of hours to cover the high-risk areas thoroughly.
Can an inspection help with a real estate transaction?
Yes, documented findings from an inspection can support decisions during a home purchase or sale where mold history is a concern.
How do you keep the mold from coming back after mold inspection?
We fix the moisture source first, not just the mold, then dry the structure and recheck it. That is what keeps mold from returning to a Spokane home.
Do you serve Spokane?
Yes. We cover all of Spokane, including Town and Country, Country Homes, Millwood, and the rest of the Spokane area. We are based in Nine Mile Falls, about 15 minutes from our Nine Mile Falls base, and answer our own phone around the clock.
More help in Spokane
Other mold services in Spokane, WA
Nearby
Mold Inspection in nearby cities
Talk to a certified team now
Need mold inspection in Spokane, WA?
Call our 24/7 line and talk to the certified crew directly. Same-day response, we bill your insurance, and free estimates.